Making Table of Patio Umbrella Stand

Patio umbrella stand – is a convenient item to have on a porch that has no trees for shade or awning for protection from the harsh rays of the sun. Umbrellas can fly away, taking with him the table if not done correctly weighted down with a stand.  Place an aluminum screen 6 inches in diameter at the bottom of the selected container. Aluminum display prohibits lava stone spill the drain hole in the bottom of the pot.

Place 2 inches of one-cubic feet of lava crushed stone at the bottom of the pot. Wiggle March 1 meter long, 2-inch diameter PVC pipe vertically in the center of the stones and pour the remaining amount of crushed lava rock in the bucket around the pipe. Pour a bag of cement mix 20 pounds in a 5-gallon bucket. Using a stir stick, mix the water with the cement mixture until the mixture is smooth peanut butter texture of patio umbrella stand.

tablespoon 2 to 3 inches of cement in the flower pot in lava stone. Shake the pot a bit to get the cement mixture in between bits of lava stone. Use the trowel to level the top of the cement. Drill a hole the size of the push pin on the side of the pole and patio umbrella stand once the cement has set.